Emlite RFID Card Meter ( Single Phase 100A MID Approved Prepayment Meter )
This Emlite RFID meter is designed to be used for the control of the electricity supply in utility or secondary metered sites such as holiday and landlord accommodation. The meter is fully approved to the European metering standard, MID (Metering Instruments Directive). The meter is therefore tested and approved as accurate for billing purposes. The meter may also be used as a time controller.
The meter is programmed by using a programming card in conjunction with the red and blue buttons at the top of the meter. The programming function allows the energy prices and standing charge to be set, whilst a debt collection facility enables a pre-set amount to be collected daily. The total amount for collection is programmed and the meter will reduce this each day by collecting monies from the remaining credit balance.
Additional card types are available to support a variety of functions including new tenancy and servicing. Please contact your supplier for further information. An electronic display indicates the amount of credit remaining on the meter. This display is also used when programming energy prices, and other meter settings. The grey push button next to the display allows the tenant / user to cycle through a set of displays showing usage totals, charges, etc.
A timer mode allows the meter to be used for the control of appliances and services where the “on” time is set using a top up card that adds a time determined by the value of the card. The amount of time added for a given card value can be programmed to a maximum value of 23h 59m per €1.
This Emlite RFID meter is designed to be used for the control of the electricity supply in utility or secondary metered sites such as holiday and landlord accommodation. The meter is fully approved to the European metering standard, MID (Metering Instruments Directive). The meter is therefore tested and approved as accurate for billing purposes. The meter may also be used as a time controller.
The meter is programmed by using a programming card in conjunction with the red and blue buttons at the top of the meter. The programming function allows the energy prices and standing charge to be set, whilst a debt collection facility enables a pre-set amount to be collected daily. The total amount for collection is programmed and the meter will reduce this each day by collecting monies from the remaining credit balance.
Additional card types are available to support a variety of functions including new tenancy and servicing. Please contact your supplier for further information. An electronic display indicates the amount of credit remaining on the meter. This display is also used when programming energy prices, and other meter settings. The grey push button next to the display allows the tenant / user to cycle through a set of displays showing usage totals, charges, etc.
A timer mode allows the meter to be used for the control of appliances and services where the “on” time is set using a top up card that adds a time determined by the value of the card. The amount of time added for a given card value can be programmed to a maximum value of 23h 59m per €1.
This Emlite RFID meter is designed to be used for the control of the electricity supply in utility or secondary metered sites such as holiday and landlord accommodation. The meter is fully approved to the European metering standard, MID (Metering Instruments Directive). The meter is therefore tested and approved as accurate for billing purposes. The meter may also be used as a time controller.
The meter is programmed by using a programming card in conjunction with the red and blue buttons at the top of the meter. The programming function allows the energy prices and standing charge to be set, whilst a debt collection facility enables a pre-set amount to be collected daily. The total amount for collection is programmed and the meter will reduce this each day by collecting monies from the remaining credit balance.
Additional card types are available to support a variety of functions including new tenancy and servicing. Please contact your supplier for further information. An electronic display indicates the amount of credit remaining on the meter. This display is also used when programming energy prices, and other meter settings. The grey push button next to the display allows the tenant / user to cycle through a set of displays showing usage totals, charges, etc.
A timer mode allows the meter to be used for the control of appliances and services where the “on” time is set using a top up card that adds a time determined by the value of the card. The amount of time added for a given card value can be programmed to a maximum value of 23h 59m per €1.
MID approved contactless card meter , This certification allows this model to be used for any sub-billing applications.
3 year warranty
Timer Function
Rating: 100A Single Phase
RFID/Contactless card technology
Digit LCD Display
kWh and Timer functions
Debt charge and standing charge features
Single tariff and dual tariff functionality for standard and economy 7 energy tariffs
Timer option also available for laundry rooms, sports lighting etc
Uses: Stop the theft of coins, break-ins over a coin meter, Ensure you comply with MID regulations for billing tenants if using old coin or card meters, Flats, Bedsits, HMOs, Emergency Accommodation, Caravan Parks, Marinas
